Обеспечение электробезопасности при подземной добыче полезных ископаемых

Shaft tower

Safely up and down and up again

Shaft tower

The shaft tower is required to take the miners up and down the shaft. The drive is a large electric motor powered by a frequency converter. To ensure maximum security, the IT system is used as the network system here. It is monitored via an ISOMETER®.

Обзор продукции Residual current monitoring
Техническая информация Electrical safety in control and auxiliary circuits

Рекомендуемые системы для контроля дифференциального тока:

Рекомендуемое оборудование для измерения электрического тока:

Оценка и отчет:

Рекомендуемые устройства для контроля сопротивления заземления:

DIN EN 50178
Electronic equipment for use in power installations

Ventilation

A reliable supply of air

Ventilation

Ventilation of underground mines is a crucial criterion for their operational safety. An interruption to the ventilation is potentially life-threatening for the miners, includes an increased fire risk and failure of the production system. This means continuous residual current monitoring using RCMS is vital, as it detects any hazardous changes to the power supply immediately.

Обзор продукции Residual current monitoring
Техническая информация Electrical safety in control and auxiliary circuits

Рекомендуемые системы для контроля дифференциального тока:

Рекомендуемое оборудование для измерения электрического тока:

Оценка и отчет:

Рекомендуемые устройства для контроля сопротивления заземления:


Drainage

Water - a life-threatening risk underground

Drainage

Drainage of underground mines is incredibly important. Any interruption to the drainage system increases the risks of shafts filling up with water and people being put in danger. From this perspective, continuous monitoring with ISOMETER®s or RCMS residual current monitoring systems is essential. They immediately recognise hazardous changes in the power supply.

Обзор продукции Residual current monitoring
Техническая информация Electrical safety in control and auxiliary circuits

Рекомендуемые системы для контроля дифференциального тока:

Рекомендуемое оборудование для измерения электрического тока:

Оценка и отчет:

Рекомендуемые устройства для контроля сопротивления заземления:


Conveyor belts

Getting from A to B quickly but safely

Conveyor belts

Electric motors are generally employed for conveyor belts used in mining, which are driven by soft starters or frequency converters. However, these generate critical harmonic vibrations and DC currents which would not normally be present in the feeding AC system. With regular RCD or simple insulation monitors (e.g. 3 lamp method or 2 voltmeter process), this cannot be monitored with the requisite precision. There is a need for modern monitoring equipment which can recognise and report these problems quickly. Some standards even require a quick shutdown, which can be achieved using Bender insulation monitoring devices.

Обзор продукции Residual current monitoring
Обзор продукции Electrical safety in control and auxiliary circuits

Рекомендуемые устройства для контроля сопротивления изоляции (-онлайн / оффлайн):

Рекомендуемые системы для контроля дифференциального тока:

Рекомендуемое оборудование для измерения электрического тока:

Рекомендуемые адапторы:

Оценка и отчет:

Рекомендуемые устройства для контроля сопротивления заземления:

DIN EN 50178
Electronic equipment for use in power installations

DIN VDE 0168
Errichten elektrischer Anlagen in Tagebauen, Steinbrüchen und ähnlichen Betrieben

Mobile equipment

Safe mobility underground

Mobile equipment

Mining vehicles are electrically powered. These cordless vehicles need monitoring of the earthing conductor in the cable (pilot wire monitoring). For this application, Bender offers a range of monitoring options, depending on the requirements for wire monitoring or fault current/earth conductor monitoring. 

Брошюры Mining

Рекомендуемые systems for ground-fault and ground-continuity monitoring:

Оценка и отчет:

Рекомендуемые устройства для контроля сопротивления заземления:

DIN EN 1889-1
Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles

DIN EN ISO 19225
Underground mining machines - Mobile extracting machines at the face - Safety requirements for shearer loaders and plough systems