- Оборудование
- Контроль сопротивления изоляции

ISOMETER® iso685-…-P
- Предустановленные профили контроля
- Надёжный контроль значений сопротивления изоляции, напряжения, ёмкости и частоты
- Встроенный веб-сервер
- Протокол связи Modbus TCP/RTU
- Для систем пофидерного контроля сопротивления изоляции
Устройство ISOMETER® iso685-...-P предназначено для контроля сопротивления изоляции сетей IT в соответствии со стандартами МЭК 61557-8 и МЭК 61557-9.
Оно может использоваться в сетях AC, 3(N)AC, AC / DC и DC. Сети переменного тока могут быть гальванически связаны с различным оборудованием постоянного тока, таким как выпрямители, преобразователи, электроприводы с регулируемой частотой вращения.
Модели устройства iso685-...-P
iso685-D-P:
Модель ISOMETER® iso685-D-P оборудована графическим ЖК-дисплеем высокого разрешения и кнопками для управления всеми функциями устройства.
Не требуетподключенияк панели управления и индикации FP200.
iso685-SP:
Модель ISOMETER® iso685-SP не имееткнопок управленияидисплея и управляется с помощью кнопок управления и дисплея, вынесенных на FP200.
Оно используется только в комбинации с панелью управления и индикации FP200.
Опция & quot; W & quot;:
Исполнение «W» с повышенной стойкостью к механическим и климатическим воздействиям (ISOMETER® iso685W-D-P и iso685W-S-P).
- Функции
- Применения
- Комплектующие
- Спецификация для заказа
- Загрузки
-
iso685-…-P
- ISOMETER® for IT AC systems with galvanically connected rectifiers or inverters and for IT DC systems (IT = unearthed systems)
- Automatic adaptation to the existing system leakage capacitance
- Combination of AMPPlus and other profile-specific measurement methods
- Two separately adjustable response value ranges of 1 kΩ…10 MΩ
- High-resolution graphical LC display
- Connection monitoring (monitoring of the measuring lines)
- Automatic device self test
- Graphical representation of the insulation resistance over time (isoGraph)
- History memory with real-time clock (buffer for three days) for storing 1023 alarm messages with date and time
- Current or voltage output 0(4)…20 mA, 0…400 μA, 0…10 V, 2…10 V (galvanically separated), which is analogous to the measured insulation value of the system
- Freely programmable digital inputs and outputs
- Remote setting of certain parameters via the Internet (web server/Option; COMTRAXX® gateway)
- Worldwide remote diagnosis via the Internet (made available by Bender Service only)
- RS-485/BS (Bender sensor bus) for communication with other Bender devices
- ISOnet: Internal separation of the ISOMETER® from the IT system to be monitored (e.g. if several IT systems are interconnected)
- BCOM, Modbus TCP/RTU and web server
- Locating current injection for selective insulation fault location
- Indication of the insulation faults selectively located by the EDS system
- Parameter setting of EDS systems
- Customer-specific texts for each measuring channel
EDS44x - Insulation fault location in AC, 3AC and DC IT systems
- Up to 12 measuring current transformers of the W…, WR…, WS… measuring current transformer series can be connected
- Response sensitivity insulation fault location: EDS440 2…10 mA; EDS441 0.2…1 mA
- Response sensitivity residual current measurement: EDS440 100 mA…10 A; EDS441 100 mA…1 A
- Communication of the components via BS bus (RS-485) or BB bus
- AC, DC or AC/DC main circuits
- AC/DC main circuits with directly connected DC components, such as rectifiers, converters, variable-speed drives
- UPS systems, battery systems
- Heaters with phase control
- Systems including switch-mode power supplies
- IT systems with high leakage capacitances
- Installations with insulation fault location
Обязательные комплектующие для ISOMETER® iso685-…-P
Type designation | Art. No. |
---|---|
A set of screw-type terminals* | B91067901 |
A set of push-wire terminals | B91067902 |
Enclosure accessories (terminal cover, 2 mounting clips)* | B91067903 |
Transparent cover 144x72 (IP65) for FP200** | B98060005 |
BB bus 6TE connector*** | B98110001 |
** If the “transparent front cover 144x72 (IP65)” is used, the cutout in the control cabinet must be increased in height from 66 mm to 68 mm (+ 0.7/-0 mm).
*** Necessary for the connection of the ISOMETER®s with an EDS44…-L
Дополнительные комплектующие для ISOMETER® iso685-…-P
Type | Supply voltage US* | Response value | Art. No. |
---|---|---|---|
EDS440-S-1 | AC/DC 24…240 V | 2…10 mA | B91080201 |
EDS440W-S-1 | AC/DC 24…240 V | 2…10 mA | B91080201W |
EDS440-L-4 | AC/DC 24…240 V | 2…10 mA | B91080202 |
EDS440W-L-4 | AC/DC 24…240 V | 2…10 mA | B91080202W |
EDS441-S-1 | AC/DC 24…240 V | 0,2…1 mA | B91080204 |
EDS441W-S-1 | AC/DC 24…240 V | 0,2…1 mA | B91080204W |
EDS441-L-4 | AC/DC 24…240 V | 0,2…1 mA | B91080205 |
EDS441W-L-4 | AC/DC 24…240 V | 0,2…1 mA | B91080205W |
EDS441-LAB-4 | AC/DC 24…240 V | 0,2…1 mA | B91080207 |
EDS441W-LAB-4 | AC/DC 24…240 V | 0,2…1 mA | B91080207W |
Relay module
Type | Supply voltage US | Art No. |
---|---|---|
IOM441-S | DC 24 V | B95012057 |
IOM441W-S | DC 24 V | B95012057W |
Варианты ISOMETER® iso685-…-P
Type | Nominal system voltage range Un | Supply voltage US | Display | Option W | Art. No. |
---|---|---|---|---|---|
iso685-D-P | AC 0…690 V; 1…460 Hz DC 0…1000 V | AC 24…240 V; 50…400 Hz DC 24…240 V | integrated | – | B91067030 |
iso685W-D-P* | AC 0…690 V; 1…460 Hz DC 0…1000 V | AC 24…240 V; 50…400 Hz DC 24…240 V | integrated | -40…+70°C, 3K5, 3M7 | B91067030W |
iso685-S-P + FP200 | AC 0…690 V; 1…460 Hz DC 0…1000 V | AC 24…240 V; 50…400 Hz DC 24…240 V | detached | – | B91067230 |
iso685W-S-P + FP200W* | AC 0…690 V; 1…460 Hz DC 0…1000 V | AC 24…240 V; 50…400 Hz DC 24…240 V | detached | -40…+70°C, 3K5, 3M7 | B91067230W |
Device variants
iso685-D-P: This device variant ISOMETER® iso685-D-P features a high-resolution graphic LC display and operating controls for direct operation of the device functions. It cannot be combined with an FP200.
iso685-S-P: This device variant ISOMETER® iso685-S-P features neither a display nor operating controls. It can only be used in combination with the FP200 and it is operated via this front panel.
Option "W": The ISOMETER®s with and without integrated display are available with option „W“ for extreme climatic and mechanical conditions (ISOMETER® iso685W-D-P and iso685W-S-P).
Загрузки для ISOMETER® iso685-…-P
Категория | Продукт | Язык | Размер | Скачать |
---|