Drilling rigs and floating production plants
Oil rigs and floating production systems
Far from land but nonetheless safe
An oil rig has working production systems which normally produce around the clock and should not be shut down due to minor electrical faults. The use of unearthed systems (IT systems) with appropriate monitoring devices from Bender ISOMETER® can guarantee this. Personal protection must also be ensured in the accommodation and supply units. This involves, for example, monitoring with RCMS residual current systems which allow the fastest possible warning and shutdown. All system data can be transferred to a central control point.
- Downloads
- Products
- Standards
- Seminars
Recommended systems for insulation monitoring:
Recommended coupling devices:
Recommended systems for residual current monitoring:
Recommended systems for insulation fault location:
Recommended for resistance grounded systems:
Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
EN 61557-9
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
EN 61557-15
Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC 61892-1
Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
IEC 61892-2
Mobile and fixed offshore units - Electrical installations - Part 2: System design
IEC 61892-7
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
Drilling ships
Secure extraction, storage and shipping
A Floating Production Storage and Offloading Unit (FPSO) is a ship used for extraction, storage and offloading of petroleum and natural gas. In offshore operations, FPSOs are used because they obviate the need of constructing a complicated, expensive pipeline infrastructure to the extraction site. Bender kits out these ships with the appropriate ISOMETER® technology to ensure maximum safety.
- Downloads
- Products
- Standards
- Seminars
Recommended systems for insulation fault location:
Recommended coupling devices:
Recommended Systems for insulation monitoring:
Recommended for resistance grounded systems:
Electrical safety in low voltage distribution systems up to 1 000 v a.c. and 1 500 v d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 8: Insulation monitoring devices for IT systems
EN 61557-9
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 9: Equipment for insulation fault location in IT systems
EN 61557-15
Electrical safety in low voltage distribution systems up to 1000 V ac and 1500 V dc - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
IEC 61892-1
Mobile and fixed offshore units - Electrical installations - Part 1: General requirements and conditions
IEC 61892-2
Mobile and fixed offshore units - Electrical installations - Part 2: System design
IEC 61892-7
Mobile and fixed offshore units - Electrical installations - Part 7: Hazardous areas
IEC 61892-5
Mobile and fixed offshore units - Electrical installations - Part 5: Mobile units